 |
Waterwell Rigs
REICHdrill T-650-WII
Top Drive Waterwell Drill
STATS:
Rated Capacity: 38,000 lb (17,236 kg) hoist
Mounting: Freightliner FLD 112 SD
Hoist: 38,000 lb (17,236 kg)
Pulldown: 27,000 lb (12,247 kg)
Rotary Head: 0 -103 rpm @ 57,200 in-lb (6,463 N*m) torque
Air Compressor: Twin screw, 900 cfm (25.5 m3/min) @ 350 psi (24.13 Bar)
Power Unit: CAT 3406 DITA diesel engine, rated 465 hp (347 kW) @ 1800 rpm
Mast: Total length 34 ft (10.4 m) with 28 ft (8.5 m) stroke
Leveling Jacks: Two rear 36 in (914.4 mm), one front 48 in (1219 mm) with built-in safety checks
Drill Pipe Handling: Equipped for 4.5 in (114.3 mm) by 20 ft (6.1 m) drill pipe. Breakout and power holding wrenches. 7,000 lb (3,175 kg) hydraulic winch with jib boom.
Air Filters: Individual two stage dry type for engine and compressor
Night Lighting: Halogen flood lights for viewing upper mast, table, power unit, and control station.
Approximate Weight & Dimensions:
Weight: 49,000 lb (22,226 kg)
Width: 8 ft 0 in (2.4 m)
Height (mast down): 13 ft 5 in (4.1 m)
Length (mast down): 38 ft (11.6 m)
Length (mast up): 27 ft 6 in (8.4 m)
Fuel Capacity: 140 gallons (530 L)
Options:
Air line lubricator
Sandline winch
Air pressure regulator
Special lift axles
Anti-tilt relief system
Special or two-tone paint
Compressor variable volume control Tethered remote helper
Cribbing rack
Vandal cover
Engine heater for cold starts
Four leveling jack system
Hydraulic welder
Water injection
Mud pumps: 4x3,5x4, and 6x5
Auxillary fuel or water tank
Operators and helper's walkway
Auxillary blowdown control
15 piece pipe trough
Down-hole Air Blast
Regen for increased hoist
Other options available:
Winch line centering arm
Rotary head: 0-129 rpm
Rotary head: Dual speed |
|
Attention Oil and Gas Drillers
Now you do have an option!
Three different, highly mobile models that can be tailored to your needs.
T700 Heavy Hoist
Air: Up to 1250 CFM
Pressure: Up to 400 PSI
Engine: Up to 750 HP
Hoist: 90,000 lbs.
T120 Magnum
Air: Up to 1250 CFM
Pressure: Up to 400 PSI
Engine: Up to 750 HP
Hoist: 120,000 lbs.
T140 Magnum
Air: Up to 1250 CFM
Pressure: Up to 400 PSI
Engine: Up to 750 HP
Hoist: 140,000 lbs
|
|
REICHdrill T-690-W
Top Drive Waterwell Drill
Rated Capacity: 40,000 lb (18,144 kg) hoist
Mounting: Freightliner FLD 112 SD.
Hoist: 40,000 lb (18,144 kg) .
Pulldown: 35,000 lb (15,876 kg)
Rotary Head: 0 -108 rpm @ 64,000 in-lb (7231 N*m) torque
Air Compressor: Twin screw, 900 cfm (25.5 m3/min) @ 350 psi (24.13 Bar)
Power Unit: CAT 3406 DITA diesel engine, rated 465 hp (347 kW) @ 1800 rpm
Mast: Total length 34 ft (10.4 m) with 28 ft (8.5 m) stroke.
Leveling Jacks: Two rear 36 in (914.4 mm), one front 48 in (1219 mm) with built-in safety checks.
Drill Pipe Handling: Equipped for 4.5 in (114.3 mm) by 20 ft (6.1m) drill pipe. Breakout and power holding wrenches. 7,000 lb (3175 kg) hydraulic winch jib boom.
Air Filters: Individual two stage dry type for engine and compressor.
Night Lighting: Halogen flood lights for viewing upper mast, table, power unit, and control station.
Approximate Weight & Dimensions:
Weight: 55,000 lb (24,947 kg)
Width: 8 ft 0 in (2.4 m)
Height: (mast down): 13 ft (4.0 m)
Length (mast down): 38 ft (11.6 m)
Length (mast up): 33 ft 7 in (10.2 m)
Fuel Capacity: 140 gallons (530 L)
Options:
Air line lubricator: 8 or 18 gal.
Air pressure regulator
Compressor variable volume control
Cribbing rack
Engine heater for cold starts
Hydraulic welder
Mud pumps: 4x3, 5x4, & 6x5
Operator and helper's walkway
15 piece pipe trough for 4 1/2" x 20' pipe
Regen for increase feed function
Winch line centering arm
Extended mast: 34 ft
Rotary head: 0-67 rpm @ 102,600 lb-in
Rotary head: 0-135 rpm @ 51,400 lb-in
Rotary head: 0-141 rpm @ 64,000 lb-in
Dual speed rotary head: 0-141 or 0-70 rpm
Sandline winch
Special lift axles: 13,000 or 20,000 lb
Special or two-tone paint
Tethered remote helper's station
Vandal cover
Water injection
Auxiliary water or fuel tank
Tilt activated feed relief system
Angle drill kit
Stabilizer or hammer holders
Down-hole air blast system |
|
|
